Truss system
4 conical connector truss 290-4
Construction height/lifting height
4,90 m/4,70 m
Load capacity
Indoor without dynamic load up to 400 kg / Outdoor max. 300 kg
Floor area
164 (w) x 132 cm (d) and 174 (w) x 140 cm (d) with clip-on foot stabilizer
Ballasting
Recommendation: With indoor or operating wind a minimum ballast of approx. 60 kg
Stability
up to max. wind force of 15 m/sec with max. 1.5 m² wind attack area
Basic equipment
Scope of delivery:
1 x Verification of stability
1 x Head section made of aluminium
- 4 x Multi deflection pulleys, adjustable
- 4 x M12 half cones optionally compatible with Prolyte or Euro/Global/HOF trusses
1 x Tower-Base
- 3 x 150 mm Adjustable foot
- 2 x M16 Eyelet
- 1 x Circular bubble
- 4 x Locking pin
- 4 x M12 half cones optionally compatible with Prolyte or Euro/Global/HOF trusses
2 x Double rear plug-in foot (each with 2 x 150 mm adjustable foot)
1 x Cross bar short on plug-in feet in front
1 x Long crossbar on front feet (for placing subwoofers)
2 x Long plug-in foot in front (each with 1 x 80 mm adjustable foot gala)
2 x Short front plug-in foot (each with 150 mm adjustable foot and locking bolt)
All components are black powder-coated!
Required truss elements
1 x 1 m Truss element
1 x 1,5 m Truss element
1 x 2 m Truss element
4 x Folding elements
All parts are black powder-coated!
Secondary securing
Scope of delivery:
1 x 10 m steel cable 8 mm, for secondary securing, chewed on one side
1 x Wire rope holder with overload indicator, for fixing the secondary securing
1 x 2t shackle for attaching the wire rope holder to the M16 eyelets of the Tower-Base
Assembly aids
Scope of delivery:
1 x Assembly aid
- 1 x Multi deflection pulleys
- 1 x Quick-Lock-Pin for lift-off protection
1 x Windensection
- 1 x Steel plate with safety point for safety rope and support points for assembling aid
- 4 x Truss clamps black
- 1 x 900-kg AL-KO Manual winch with 8 mm steel cable
- 1 x Stop plate on the steel cable for erecting the tower
All parts are black powder-coated!
